gsr arm got the carbon sharkguard…
haphazard | motorcycles | photography | projects | sv650
so i got bored and added the carbon fiber sharkguard that used to be on the SV’s Arm to the GSR Arm. 😀
-peter
Similar Posts
- bikes | haphazard | photography | projects | road bikes
the Volpe all fender’ed up…
just some snaps of the Bianchi Volpe with some Velo Orange (VO) 45mm Stainless fenders, finally starting to look like a tourer 😉 i have to say how enthused i am by the VO fenders, i’ve purchased them before and they’ve never ceased to impress me. the kit that comes with them has pretty much…
- bikes | haphazard | photography | projects | schwinn
planning out the pre-war Schwinn…
as you all may know i have a ’38 Schwinn straight bar that i am starting to modify and make into my town bike. so far the conversion has been very slow going, as i always seem to have another project that manages to creep in front of the poor old Schwinn. but now as…
- bikes | haphazard | photography | projects | road bikes
Bianchi Volpe racked out…
bwa, nice racks! 😉 sorry… anyhow! got the JANDD Extreme and Expedition racks on the Bianchi Volpe, as well as some new Shimano M530 SPD pedals, looking slick! Ortleibs for the rear come later in the week. -peter
the Klein Quantum Race, finally all buttoned up…
so basically I’ve been sitting on the Klein for some time now, being too lazy (or too busy with life and other projects) to get the steerer cut. all that’s really changed is the stem (now an EC90 carbon), stack height (a bit shorter) and the cut steerer. took it on it’s first ride of…
- bikes | haphazard | photography | projects | road bikes
lopped off the Volpe’s steerer…
so i got bored yesterday and hacked off a section of the Bianchi Volpe’s steerer tube. i was actually really hesitant to do it, but the positioning felt good and i was, as i said before, bored. thankfully though i had a bit of forethought as to potential re-positioning, so i added another 5mm spacer…
