getting ready for wheel building…
just setting up, should be getting my spokes today and that’s the last link in the chain as far as building up the wheelset… c’mon USPS!!! 😉
-peter
just setting up, should be getting my spokes today and that’s the last link in the chain as far as building up the wheelset… c’mon USPS!!! 😉
-peter
hey there everybody, so here goes, this is my latest bike acquisition, a Scattante Titanium Cross. just drove down to get it in Portland, OR last week to snag it up. these frames were built for a very short period by Lynskey and sold by Performance Bike under their (purchased) name of Scattante. it’s supposedly…
A big update here. So, the big reveal! Haha, or something like that. Two and half weeks ago I spent an afternoon packing the fork, stem, spacers, and frame together and I shipped it all down to Ruckus Composites in Portland, OR to have it all paint matched to the frame. Less than a week…
so here it is, after about two years i finally have the ’92 Trek 750 Multitrack able to be ridden around! fitted now are the Resist Nomad tires in the 700x45c size, they rock, very much enjoying them, big and comfy. i also ended up with an Shimano XT direct mount front derailleur mounted with…
trying to figure out the size of spacers that are going to be required for these ’08 1000rr tokico calipers. -peter
so the gsr600 swingarm arrived today from over the pond in the uk, sending it off to zoran at twin works factory west on friday or saturday!!! measurements are looking awesome, cross your fingers and knock on wood! haha later, assisting work tomorrow, 🙂 -peter
the Trek project is slowly progressing, some winter trip plans haven’t helped it’s forward momentum, but i’m excited for them none-the-less. what we have here though is a set of Paul Components Neo-Retro cantilever brakes. Eventually the Trek will follow in the footsteps of the Volpe Build with a pair of Paul Brake Boosters, one…