random life, the past three days…
just been a couple pretty, foggy days, so i couldn’t help but pick up the camera and enjoy it a bit, in between work…
-peter
Similar Posts
Pacenti Pari-Moto’s for the Spooky Darkside XC…
just a quick update on the Spooky. yesterday i got all the parts that were needed to finish up the wheelset, though i didn’t actually get the mail until today 😉 what was needed was the 20mm-QR front hub adapters and skewers, i had received the Pacenti Pari-Moto 38x650b tires and some Kenda tubes earlier…
racks for the Trek 750 Multitrack…
this time around with the touring build i decided to go the Tubus route, with a Logo for the rear and Duo for the front (both imported from the UK in Silver). the logo in the rear is going to a bit to get used to, as it has a MUCH smaller top platform than…
Sim Works Caroline stem for the Strong…
today the mailman was kind enough to bring me the Strong’s new stem and spacers, a gorgeous fillet brazed steel Sim Works Caroline stem made by Nitto in Japan. the spacers are also made by Sim Works and match the stem great! they’re actually the nicest, thinnest steel spacers I’ve seen! the stem is an…
bikes | haphazard | photography | projects
Bianchi Volpe back from powder coating…
so, just got the Volpe back from the powder coaters, colors more olive than i thought, but i still like it. got bored and cleaned up the headset and bottom bracket faces to install the two parts i had sitting around 😉 more as it get it, -peter
bikes | haphazard | photography | projects | schwinn
planning out the pre-war Schwinn…
as you all may know i have a ’38 Schwinn straight bar that i am starting to modify and make into my town bike. so far the conversion has been very slow going, as i always seem to have another project that manages to creep in front of the poor old Schwinn. but now as…
haphazard | motorcycles | photography | projects | sv650
sv phoenix update, cams, cams… cams!!!
so adding an old smart-tre and cam swap to the old sv650’s agenda of things to do; make my life even busier, check! 😉 basically the trick here is, also the reason you only see two cams here (there are four in the sv, two intake, two exhaust, one of each crowning either head), and…